|
1. Hazards Identification
|
|
| Not classified as hazardous according to NOHSC criteria and ADG code. |
|
|
| 2. Product Identification |
| Product: |
Agnew’s Water Putty – Multi-Purpose Filler |
| Use: |
A plaster-based filler |
| Appearance: |
Cream powder of low odour |
| Specific Gravity: |
Circa 1 |
|
|
|
| 3. Code |
| UN Number: |
N/A |
| Dangerous Goods Class: |
N/A |
| Hazchem Code: |
N/A |
| Poison’s Schedule: |
N/A |
|
|
|
| 4. Health Effects and First Aid |
| Swallowed: |
No known adverse effects – drink plenty of water and seek medical advice if ill effects persist. |
| Eye Contact: |
Minor irritation – Flush with plenty of water. |
| Skin Contact: |
Constant contact over a long period may lead to a dryness of skin but no other known effect. Wash off with water. |
| Inhalation |
May cause minor irritation. Remove to fresh air and if any ill effect persists, seek medical advice. |
| Advice to doctors |
Treat Symptomatically. |
|
|
|
| 5. Precautions for Use |
| Exposure Limits: |
TLV = 10mg/m3 |
| Ventilation: |
Mechanical ventilation is recommended if excessive dust is generated when handling or mixing. |
| Personal Protection: |
|
| Respiratory |
use a respirator which conforms with AS 1716 where dust levels exceed the exposure standard. |
| Eye |
Use goggles if dust causes irritation. |
| Skin |
wear impervious gloves if irritation occurs. |
| Flammability |
Water Putty is not flammable. |
|
|
|
| 6. Safe Handling Information |
| Storage and Transport: |
Keep dry. Conditions causing water to be present will harden the putty during storage. |
| Spills: |
Sweep up and place in waste container. Avoid creating excessive dust. Hosing into drains may cause blockages. |
| Disposal: |
Landfill in accordance with government regulations. |
| Fire and Explosion Hazards: |
Nil. |
|
|
|
| 7. Contact: |
| Andrew Kovach |
BH: 61 3 98990144
email:
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
Reviewed May 2008
|
